Please note: the instructions below are for information purposes only. If you are unsure, please consult a professional fitter.
If you have a two walled kitchen first decide on which wall that you require the panels to be fitted to.
Take into account our maximum length of 3 metres so there would need to be a joint if a longer section is required. However, this can be located where it suits best.
Take into account the thickness, e.g. 3mm or 5mm and start from one side of the wall as below:
Measure the total length and required height.
Make a note then return back to the same starting position and measure to the first socket (as below).
Make a not of distance.
Continue as below sketch to each socket and also note whether you have single or double sockets.
Once sockets are measured, measure up from the bottom of the panel to the bottom edge of the socket and continue to do this to all sockets.
When moving onto the next panel on the following wall, continue the same proces but remove from the final length measurement the thickness of the panel, i.e it could be 3 or 5mm.